Molar Enthalpy Change Calculator
Free molar enthalpy change calculator: find ΔH, q or moles, use calorimetry data and Hess’s Law, with step-by-step working and exo/endothermic results.
Enthalpy Change Calculator
Add each step's ΔH. Use the multiplier if you scaled the equation, and tick “Reverse” if you flipped it.
Quick start
- Open the Calculator tab and choose a mode: ΔH = q/n, Calorimetry or Hess's Law.
- Fill in the boxes. Check the units shown next to each box.
- Press Calculate (or press
Enterin any box). - Read the result. The badge tells you whether the reaction is exothermic or endothermic, and the diagram shows the energy change.
- Open Show working to see every step, and use Copy result to paste the answer into your notes.
Mode 1: ΔH = q/n
Use this when you already know the heat transferred and the amount of substance.
- Pick what to Solve for: ΔH, q, or n. The box for that quantity is hidden because it is the answer.
- Enter the other two values and choose their units (J or kJ for q; kJ/mol or J/mol for ΔH).
- Under q, set the heat-flow direction. Choose “released” if the problem says heat was given out, and the calculator makes q negative for you. Choose “as entered” if you are typing the sign yourself.
Solve for ΔH, q = 2500 J, direction “released”, n = 0.05 mol → ΔH = −50 kJ/mol.
Mode 2: Calorimetry
Use this for coffee-cup or bomb-calorimeter experiments where you measured a temperature change.
- Enter the mass of the solution (usually the total mass of water, in g) and its specific heat (4.18 J/g·°C for water, already filled in).
- Enter the initial and final temperatures.
- If your calorimeter absorbs heat too, enter its heat capacity in J/°C. Leave it blank otherwise.
- Enter the moles of the limiting reactant, or switch to “from mass and molar mass” and let the calculator work out the moles.
qsurroundings = 100 × 4.18 × 6.5 = 2717 J, so qrxn = −2717 J and ΔH = −54.34 kJ/mol.
Mode 3: Hess's Law
Use this to combine the ΔH values of several known reactions into the ΔH of a target reaction.
- Enter the ΔH (in kJ/mol) of each known step in its own row.
- If you had to multiply an equation, put that factor in the multiplier box (for example 2, or 0.5).
- If you had to flip an equation, tick Reverse. The sign of its ΔH changes.
- Use + Add step for more rows, and ✕ to remove one.
Row 1: −393.5, multiplier 1. Row 2: −283.0, multiplier 1, Reverse ticked → ΔH = −110.5 kJ/mol.
Extra options
- Significant figures: controls how many figures appear in answers.
- Live update: recalculates as you type, so you can see how changing one value affects the answer.
- Reset: clears the boxes on the current mode only.
- Recent calculations: your last six answers appear under the result until you refresh the page.
Troubleshooting
- “Enter both…” messages: a required box is empty. Only the optional calorimeter capacity may be left blank.
- “n must be greater than zero”: moles can't be zero or negative. Check your mass and molar mass.
- Warning that n is negative: q and ΔH have opposite signs. Re-check the heat-flow direction.
- Answer is 1000× too big or small: check whether you entered J or kJ.
What is enthalpy?
Enthalpy (H) is the heat content of a system. We can't measure it directly, but we can measure the change in enthalpy, ΔH, which equals the heat transferred at constant pressure. Most reactions in a lab flask or coffee-cup calorimeter happen at constant (atmospheric) pressure, so the heat you measure is ΔH.
Exothermic and endothermic reactions
| Exothermic | Endothermic | |
|---|---|---|
| Sign of ΔH | Negative | Positive |
| Heat flow | System → surroundings | Surroundings → system |
| Surroundings | Get warmer | Get cooler |
| Products vs reactants | Lower enthalpy | Higher enthalpy |
Molar enthalpy change
- \(\Delta H\) = molar enthalpy change (kJ/mol)
- \(q\) = heat absorbed (+) or released (−) by the reaction (J)
- \(n\) = amount of substance (mol)
Dividing by n makes the value independent of how much reactant you used, so results from different experiments can be compared. Remember to convert J to kJ by dividing by 1000.
Example: If 2500 J of heat is released by 0.05 mol of reactant:
Calorimetry
In a calorimeter, the heat released or absorbed by the reaction changes the temperature of the water (and the calorimeter itself). The heat gained by the surroundings is:
- \(m\) = mass of solution (g)
- \(c\) = specific heat capacity (J/g·°C), 4.18 for water
- \(C_{\text{cal}}\) = heat capacity of the calorimeter (J/°C)
- \(\Delta T\) = final temperature − initial temperature
A temperature rise means the reaction gave out heat (exothermic), so qrxn is negative. This calculator assumes no heat is lost to the room and that the solution behaves like water. Real experiments usually lose a little heat, so measured values tend to be slightly less negative than data-book values.
Hess's Law
Enthalpy is a state function, which means the total ΔH depends only on the starting and ending substances, not on the route taken. So a reaction's ΔH equals the sum of the ΔH values of any series of steps that adds up to it:
- Reversing an equation flips the sign of its ΔH.
- Multiplying an equation by a factor multiplies its ΔH by the same factor.
- Substances that appear on both sides once the steps are added cancel out.
Common mistakes
- Forgetting that a released heat means a negative ΔH.
- Mixing J and kJ.
- Using the mass of the reactant instead of the mass of the water for m.
- Using the moles of an excess reactant instead of the limiting reactant.
